2U Modular Telecom DC Power System Integration with MC2600 Power Management
Product Details
Modular Telecom DC power system
,SNMP remote power management
,Web-based telecom rectifier system
2U Modular Telecom DC Power System Integration with MC2600 Power Management
Product Overview of 2U Modular Telecom DC Power System Integration
The ET4890-M3F32 DC rack power system provides a high-capacity, resilient DC power solution designed specifically for telecommunications infrastructure, data center operations, and industrial applications requiring dependable DC power distribution. It accepts 220VAC single-phase input and delivers a stable DC output adjustable between –43VDC to –58VDC, with a nominal operating point of –53.5VDC. Offering a maximum output capacity of 9kW, this system reliably supports high-demand installations while achieving power conversion efficiency exceeding 96%.
Featuring a modular and redundant design, the system supports up to 3*1.74kw rectifier modules configured for N+1 redundancy, with each compact module weighing under 2kg. The rectifiers utilize forced-air cooling, achieve a near-unity power factor (≥0.99), and maintain low total harmonic distortion (THDi ≤5%) for efficient and clean power conversion. With front-access maintenance, top-panel cabling, and IP20 ingress protection, the 2U rack-mountable chassis emphasizes operational safety, ease of service, and straightforward integration into standard 19-inch cabinets.
The DC distribution panel is equipped with 1*63A 1P battery circuit breakers and includes Battery Low Voltage Disconnect (BLVD) functionality for secure and flexible power management. System intelligence is provided by a dedicated controller featuring 2 analog sensor inputs, 8 digital status inputs, and 2 configurable dry-contact alarm relays. Remote monitoring and management are enabled via RS232/485 and SNMP interfaces, while an integrated LCD display allows for local status viewing and configuration.
Application of 2U Modular Telecom DC Power System Integration
-
Remote unattended monitoring stations
-
Industrial control cabinets
-
Office environments requiring silent operation
-
Hybrid energy sites with solar/wind integration
-
Lithium-ion battery-based backup systems
Technical Specification of 2U Modular Telecom DC Power System Integration
| AC Power Distribution |
Input mode
|
220VAC single-phase, 40A/2P | ||
| Input frequency | 45~65Hz, rated value: 50Hz/60Hz | |||
| DC Power Distribution |
Output voltage | -43~-58VDC, rated value: -53.5VDC | ||
| Maximum capacity | 5.22kw(3*1.74kw, N+1 redundancy) | |||
| Battery breakers | 1*63A/1P | |||
| Load breakers |
BLVD: 2*10A/1P+2*16A/1P+2*20A/1P+1*40A/1P |
|||
| Rectifier Module | Input voltage | 85VAC～300VAC, rated 220VAC | ||
| Efficiency | >94% | |||
| Rated power | 1740W(176~300VAC) | |||
| Working temperature | -40℃~+75℃(fully output below 50℃) | |||
| Dimension | 106.5mm(W)×286mm(D)×41.5mm(1U/H) | |||
| Weight | ≤2kg | |||
| Cooling mode | Forced cooling | |||
| Power factor | ≥0.99 | |||
| THD | ≤5% | |||
| DC output | –43 ~ –58VDC, rated –53.5VDC, maximum 33A | |||
Controller of 2U Modular Telecom DC Power System Integration
-
Model: MC2600
-
Signal input: 2 AI (2 ambient temp), 8 DI
-
Alarm output: 2 dry contact
-
Communication port: RS232/485, SNMP
-
Display mode: LCD
Application Environment of 2U Modular Telecom DC Power System Integration
-
Operating temperature: –40℃ ~ +65℃ (full output below 50℃)
-
Storage temperature: –40℃ ~ +70℃
-
Operating humidity: 5% ~ 95% (non-condensing)
-
Altitude: 0 ~ 3000m (If the altitude is within the range of 2000m to 3000m, the maximum operating temperature decreases by 1℃ as the altitude increases by 200m.)
Views of 2U Modular Telecom DC Power System Integration
-
28U Intergrated Outdoor Power Cabinet With Rectifier System UPS Battery Energy Storage Enclosure
28U Intergrated Outdoor Power Cabinet With Rectifier System UPS Battery Energy Storage 1. Brief introduction: Outdoor telecom cabinets typically come with a range of features to ensure the protection and functionality of the telecom equipment. Some common features of outdoor telecom cabinets include... -
Outdoor Power Cabinet , Outdoor Telecom Cabinet With Water Sensor / Door Sensor
Outdoor Power Cabinet, Outdoor Telecom Cabinet With Water Sensor / Door Sensor 1. Description The cabinet is one compartment cabinet. The cabinet cooling use air conditioner and heat exchanger, to ensure the equipments operate normally at stable temperature range, so as to make the service life of ... -
Temperature Control Outdoor Telecom Cabinet IP55 Ingress Protection With Generator Socket
Temperature Control Outdoor Power Cabinet / Outdoor Telecom Cabinet With Generator Socket 1. Specifications (1) Technical Parameters Ingress Protection: IP55 Grade B Lightning Proof: Nominal: 60KA, Max.: 100KA Temperature: Working Temperature: -40°C ~ +55°C Storage Temperature: -50°C ~ + 70°C ... -
Emerson Rectifier / Battery Outdoor Power Cabinet Sandwich Structure Panel IP55
Sandwich Structure Panel Outdoor Power Supply Cabinet With Emerson Rectifier and Battery 1 Product description 1.1 Appearance After the cabinet is installed, as shown in Figure 1 and Figure 2 Figure 1 Figure 2 1.2 Cabinet configuration The outdoor integrated cabinet configuration of this project is ...
