40U Outdoor Battery Cabinet Customized IP55 Easily Assembled Cabinet With Cooling

1. 40U Outdoor Battery Cabinet Customized IP55 Easily Assembled Cabinet With Cooling Feature

• The cabinet is dustproof, sunproof and rainproof, which is used in outdoor environment.
• Cabinet cooling: fans and air conditioner. (Other cooling option: heat exchanger). MTBF≥50000h
• The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. There are entrance holes individually for power cable, signal cable and optical cable.
• All the cables used in the cabinet are made from flame retardant materials.

2. 40U Outdoor Battery Cabinet Customized IP55 Easily Assembled Cabinet With Cooling details:

• Cabinet Material: The cabinet is made of galvanized steel, with double walls, thickness of outer plate: 1.5mm, thickness of inner plate: 0.8mm. There are heat insulation between inner wall and outer wall. The insulation material is 20mm PEF, heat insulation coefficient: 0.035W/m·K. The cabinet is assembled type.

• Cabinet Structure: The cabinet includes battery shelf for placing batteries. The cabinet includes one peltier air conditioner and fans, installed on front door.

• Cabinet Door and Lock: The cabinet includes one front door. The cabinet door uses embedded structure. The door opening angle is larger than 110°and the door limit device can limit the opening angle. The lock is theftproof three point lock, supporting padlock.

3. 40U Outdoor Battery Cabinet Customized IP55 Easily Assembled Cabinet Quick Details:

4. 40U Outdoor Battery Cabinet Customized IP55 Easily Assembled Cabinet Specifications:

5. Dimension Diagram

6. Door lock theft proof design

• Damage resistance of the theft proof lock meets GA/T 73-1994 “Mechanical Anti-theft Lock” class B requirement, supporting padlock.

• Three point lock

7. Cable Inlet

Feeder cable and other external cables all use bottom wiring method.

8.  Grounding Protection

• The cabinet includes grounding copper bar with anti-corrosion coating. There are enough screws for wiring connection terminals.
• The metal part of the cabinet should be interconnected and be connected with grounding bar. Connection resistance between any two points is lower than 0.1Ω.
• Protective earthing of other equipments inside the cabinet should be connected to the grounding bar.

9.  Connection and Fastening

• Use anti-loose threaded connection as structure and bearer connection. Anchor bolt for fixing cabinet use hot dip galvanized bolts.
• Door hinges use inner hinge mode.

10.  Appearance and Surface Treatment

Cabinet surface coating is outdoor special powder coating, with white gray color (PANTONE 428C). The coating complies with GB/T 3181-2008 requirement.

11.  Door sensor, smoke senser and LED lamp install on the top.

12. Packing and Shipping