Payment & Shipping Terms:
|Coating:||Anti-corrosion Outdoor Powder Coating||Cabinet Inlet:||Down|
|External Size:||450×300×700mm (W×D×H)||Cabinet Layout:||One Compartment, For Installing 19” Equipment|
|Installation:||Pole Mounted/wall Mounted||Cabinet Door:||One Front Door|
outdoor pole mount enclosure,
pole mount cabinet,
Sandwich Steel Pole Mount Cabinet
Sandwich Structure Steel Pole Mount Cabinet Outdoor Equipment Cabinet
|Place of Origin: Shenzhen, China (Mainland)||
External Size:W×D×H 450×300×700mm
W×D×H 357×214×601mm (19”, 7U)
|Brand Name: ESTEL||Structure: double wall, with insulation, sandwich structure.|
|Model: ET453070P||Cabinet Layout: one compartment, for installing 19” equipment|
|Product Name: Pole Mount Enclosure||Protection Level: IP55|
|Certification: ISO9001, CE, 3C, FCC, TLC, IP55||Cabinet Lock: anti-theft three point lock|
|Application: outdoor telecom base station||Cable Entry: at cabinet bottom|
|Material: galvanized Steel||Illumination: DC48V LED lamp|
|Heat Insulation: PEF||Cabinet Door: one front door|
|Color: grey (support custom made)||Cooling: DC48V Peltier Air Conditioner and fans|
|Coating: anti-corrosion outdoor powder coating||Installation: Pole mounted|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 set|
|Payment Terms:||L/C, D/A, D/P, T/T|
|Supply Ability:||10,000 sets per month|
|Delivery Time:||15-20 working days|
|Packaging Details:||wooden case|
1.1 Cabinet Structure: the cabinet use sandwich structure, outer plate is 1.5mm galvanized steel, inner plate is 0.8mm galvanized steel, with 40mm insulation between outer plate and inner plate.
1.2 Door and Door Lock: the cabinet includes one front door. The door opening angle is larger than 110° and the door limit device can limit the opening angle. The lock is theftproof three point lock, supports padlock.
1.3 Applicable Environment Conditions:
Environment temperature: -40°C ~ + 70°C;
Environment humidity (RH): ≤95% (at + 40°C);
Air pressure: 62kPa ~ 102kPa.
1.4 Cabinet Load Bearing: ≥300kg.
1.5 Surface Treatment: degreasing, derusting, rustproof phosphating (or galvanizing), powder coated.
1.6 Flame Retardance: comply with GB5169.7 test A
1.7 Withstand Voltage: the withstand voltage between grounding devices and cabinet body parts is not lower than 3000V(DC)/1min.
1.9 Mechanical Strength: each surface can bear upright pressure＞980N; after the door is open, its outer end can bear upright pressure ＞200N.
The ET453070P Pole Mounted Outdoor Telecom Base Station Cabinet is widely used in wireless communication base station, such as 4G system, communication/network integrated service, access/transmission switching station, emergency communication/transmission, etc.
3.1 The cabinet is dustproof, sunproof and rainproof, which is used in outdoor environment.
3.2 The cabinet use DC48V 100W peltier air conditioner and fans for cooling.
3.3 The cabinet includes -48VDC LED lamp for illumination.
3.4 The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. There’re cable inlets individually for power cable, signal cable and optical cable at the bottom of cabinet.
3.5 All the cables, seal and insulation material used in the cabinet are made from flame retardant materials.
3.6 The cabinet use standard 19” rack installation method.
4. Dimension Diagram
Cabinet External Size: 450mm×300mm×700mm (W×D×H)
LED illumination lamp, door sensor, fans are installed at the top part of the cabinet.
All outside cables use bottom entrance method.
(1) The cabinet includes grounding copper bar with anti-corrosion coating. There are enough screws for wiring connection terminals.
(2) The metal part of the cabinet should be interconnected and be connected with grounding bar. Connection resistance between any two points is lower than 0.1Ω.
9.1 Door lock theft proof design
(1) Damage resistance of the theft proof lock meets GA/T 73-1994 “Mechanical Anti-theft Lock” class B requirement, supporting padlock.
(2) Three point lock
9.2 Connection and Fastening
9.3 Appearance and Surface Treatment
Cabinet surface coating is outdoor special powder coating, with white gray color (PANTONE 428C). The coating complies with GB/T 3181-2008 requirement.
10. Packing and Shipping
Our Delivery Agent
The goods can be shipped by sea, by air, by courier, by land, by train, etc.
Besides the following delivery agent, we can also look for the delivery agent with the best price in china if you need us to do for you.
11. Our Contact Information
Mobile Phone: 0086-13752765943
Telephone: 0086-0755 66600941
12. Our Partner
Contact Person: Fiona Liang
Tel: 86-13752765943 / 86-0755 23592644