Outdoor Telecom Cabinet 30U IP55 with 1500W AC for Base Station Solar and Control Anti Theft Weatherproof Floor Mounted

Product Description

This is a high-performance outdoor telecom cabinet designed to protect valuable equipment from harsh weather conditions. It features a spacious 30U 19-inch internal rack and designed to accommodate both active and passive telecom equipment. Constructed from galvanized steel with a durable polyester powder coating, it ensures long-term reliability and high security.

Applications

Widely used in telecom operators' mobile telecommunication sites, outdoor small shelters, railway electrical control cabinets, electronic police systems, communication base stations, outdoor air detection stations, and solar control cabinets.

Technical Parameters

Protection Level: IP55

External Dimensions: H1650mm × W600mm × D600mm (customizable)

Internal Space: 19 inch 30U

Material: Galvanized steel sheet, single layer, thickness of load-bearing components 2.0mm

Insulation: 20mm PEF

Coating: Polyester powder coating (Color RAL7035)

Cooling: AC220V 50Hz 1500W Air Conditioner (1 set-optional choice); 220VAC 50Hz fans with thermostats (2 pieces)

Lighting: AC220V 50Hz LED Lamp (1 set)

Working Temperature: -40℃ to +55℃ (+Solar Radiation)

Storage Temperature: -40℃ to +70℃

Working Humidity: 5% to 95% (No condensation)

Working Altitude: 0 to 4000 meters

Locking System: Anti-theft three-point locking system, inner hinges

Cable Routing: Cable in and out from the bottom

Maintenance: One front and rear door open

Features

High protection grade: IP55 for dust and water resistance.

Strong anti-theft ability: embedded door, inner hinges, three-point lock, supporting additional padlock.

Efficient cooling: 1500W air conditioner as optional and 2 thermostat-controlled fans.

Comprehensive protection options: door sensor, smoke sensor, water sensor, temperature and humidity sensor.

Support remote management to improve security and minimize customer's operation cost.

Operation Guide

Installation: Place the cabinet on a flat and solid concrete foundation. Secure it using anchor bolts through the base mounting holes.

Grounding: Connect the grounding terminal to the earth system to prevent electrical hazards.

Cable Routing: Open the front door, route power and signal cables through the bottom cable entry glands. Arrange cables neatly to avoid interference.

Locking: Use the key to operate the three-point lock. For extra security, attach an additional padlock to the provided hasp.

Maintenance: The cabinet is designed for front and rear maintenance. Open the door to access the 30U rack. Regularly check the air conditioner and fans to ensure proper cooling, and clean the external air filters to maintain airflow.

Sensors: If installed, connect optional sensors (door, smoke, water) to the alarm monitoring system for remote alerts.