|
Product Details:
Payment & Shipping Terms:
|
| Rated Capacity (5HR): | 200 Ah | Nominal Voltage: | 48V |
|---|---|---|---|
| Max. Charging/Discharging Current: | 100A (Max. Over Current 150A Or 200A) | Energy: | 9600Wh |
| Dimensions (W*D*H) Mm: | 442*520*244 | Installation: | 19'' Standard Rack Mountable |
| Cycle Life: | 6000 Cycles | IP Class: | IP30 |
| Highlight: | 48V 200Ah Lithium Iron Phosphate Battery,LiFePO4 Battery for Telecom Power System,Outdoor Battery Cabinet LiFePO4 Battery |
||
48V 200Ah Lithium Iron Phosphate Battery LiFePO4 Battery for Telecom Power System Outdoor Battery Cabinet
1. Features of 200Ah Battery for Telecom Power System:
2. Typical Applications of 200Ah Battery for Telecom Power System:
![]()
3. Technical Parameters of 200Ah Battery for Telecom Power System:
| Item | Parameter |
| Rated Capacity (5HR) | 200 Ah |
| Nominal Voltage | 48V |
| Discharge Ending Voltage | 40.5V |
| Charging Limited Voltage | 54V |
| Max. Charging/Discharging Current | 100A (Max. over current 150A or 200A) |
| Weight | Approx. 79.3kg |
| Energy | 9600Wh |
| Display | With LCD display |
| Max. Number of Parallel Connection | 15 |
| Dimensions (W*D*H) mm | 442*520*244 |
| Installation | 19’’ standard rack mountable |
| Design Life | 20 years |
| Cycle Life | 6000 cycles |
| IP Class | IP30 |
| Case Material | SPCC |
| Operating Temperature |
Charging: 0 to +45℃ Discharging: -10 to +55℃ Storage: -20 to +60℃ |
| Terminal | M6 |
4. Discharge parameters of 200Ah Battery for Telecom Power System:
| Constant Current Discharge Table (Amperes) at 25℃ | |||||
|
Time / Voltage |
2h | 4h | 6h | 10h | 20h |
| End of discharge voltage 40.5V | 100A | 50A | 33.3A | 20A | 10A |
| Constant Power Discharge Table (Watts) at 25℃ | |||||
|
Time / Voltage |
2h | 4h | 6h | 10h | 20h |
| End of discharge voltage 40.5V | 4800W | 2400W | 1600W | 960W | 480W |
5. FAQ
1) Are all products are ready stock?
No. As each client’s project need different telecom power system, with different power capacity, different grid power specification, different load equipment and hence different DC output breakers configuration. So every system is a newly designed for each client.
2) Will it be difficult for client to install and built the connection and communication of the power system?
Not at all. Every telecom power system will be installed in a cabinet, and we will installed all the equipment inside, and make a successful connection, communication and commissioning at the factory. Only after all modules can communicate with each other successfully, we will do the packaging work.
3) Will the power cabinet get be damaged during long term transportation? Such as if we are in another continent?
No need worry about this. We use fixation metal part to fix the whole cabinet on the wooden pallet, very firmly. Besides, we use very thick and good quality foams then wrapping film to wrap the power cabinet, and the final packaging will be a wooden case, very safe, even for long term transportation in road with very bad situation.
4) How about after-sales services?
Every client of of us enjoys life time after-sales remote support. We will response you within 12hrs, no matter which country are you in.
Contact Person: Ms. Fiona Liang
Tel: +8613752765943 / 86-0755 23592644