Rainproof Robust IP55 Outdoor Pole Mount Enclosure With Back Panel / Circuit Breaker Box
Product Details
Robust Pole Mount Enclosure
,Rainproof Pole Mount Enclosure
,IP55 outdoor pole mount enclosure
Rainproof Robust IP55 Outdoor Pole Mount Enclosure With Back Panel / Circuit Breaker Box
1. Application of pole mount cabinet
This pole mount outdoor cabinet ET301540-P1 is usually used in wireless communication base station, can be used for installing switch, solar controller, modem, battery, power supply, circuit board, breaker fiber device etc.
2. Features of outdoor pole mount enclosure
(1) High protection level: IP55. The cabinet is dust-proof, sun-proof and waterproof, which is used in outdoor environment.
(2) Material: 1.5mm thickness high quality galvanized steel, robust.
(3) Surface treatment: outdoor anti-corrosion powder coating.
(4) Cabinet cooling: direct ventilation.
(5) The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding.
(6) All the screws use stainless steel with high anti-corrosion.
3. Technical data of pole mount cabinet
| Item | Type | Technical Parameter |
| Structure | Dimension | External Dimension: W×D×H 300×150×400mm |
| Layout | 1 compartment | |
| Equipment Installation Method | Including one back plate and one tray | |
| Door | With one front door and cabinet lock | |
| Material | Galvanized steel, single wall without insulation | |
| Ingress Protection | IP55 | |
| Cable Entry | Including cable entry gland on the bottom | |
| Earthing | Including copper bar | |
| Installation | Pole mount, including installation accessories | |
| Temperature Control | Cooling | Including vent on the two sides of cabinet |
| Temperature | Temperature | Working Temperature: -40°C ~ +55°C |
| Storage Temperature: -50°C ~ + 70°C | ||
| Transport Temperature: -50°C ~ +70°C | ||
| Humidity | Relative Humidity | 5% ~ 100% |
| Pressure | Air Pressure | 62kpa ~ 101kpa (similar to 0m ~ 5000m altitude) |
| Radiation Intensity | Solar Radiation Intensity | 1120 ×(1±5%)W/m2 |
4. Cabinet Dimension
External Dimension: W×D×H 300×150×400mm
5. Pole Mount Diagram
6. Pole mount cabinet display
7. Package -Carton
-
28U Intergrated Outdoor Power Cabinet With Rectifier System UPS Battery Energy Storage Enclosure
28U Intergrated Outdoor Power Cabinet With Rectifier System UPS Battery Energy Storage 1. Brief introduction: Outdoor telecom cabinets typically come with a range of features to ensure the protection and functionality of the telecom equipment. Some common features of outdoor telecom cabinets include... -
Outdoor Power Cabinet , Outdoor Telecom Cabinet With Water Sensor / Door Sensor
Outdoor Power Cabinet, Outdoor Telecom Cabinet With Water Sensor / Door Sensor 1. Description The cabinet is one compartment cabinet. The cabinet cooling use air conditioner and heat exchanger, to ensure the equipments operate normally at stable temperature range, so as to make the service life of ... -
Temperature Control Outdoor Telecom Cabinet IP55 Ingress Protection With Generator Socket
Temperature Control Outdoor Power Cabinet / Outdoor Telecom Cabinet With Generator Socket 1. Specifications (1) Technical Parameters Ingress Protection: IP55 Grade B Lightning Proof: Nominal: 60KA, Max.: 100KA Temperature: Working Temperature: -40°C ~ +55°C Storage Temperature: -50°C ~ + 70°C ... -
Emerson Rectifier / Battery Outdoor Power Cabinet Sandwich Structure Panel IP55
Sandwich Structure Panel Outdoor Power Supply Cabinet With Emerson Rectifier and Battery 1 Product description 1.1 Appearance After the cabinet is installed, as shown in Figure 1 and Figure 2 Figure 1 Figure 2 1.2 Cabinet configuration The outdoor integrated cabinet configuration of this project is ...
