Product Details:
Payment & Shipping Terms:
|
External Dimension: | W×D×H 900×900×2100mm | Material: | Sandwich Structure Panel, Galvanized Steel, Double Wall With Heat Insualtion |
---|---|---|---|
Equipment Install Method: | Standard 19"rack And 2 Layer Battery Shelf | Door Open: | One Front Door And One Rear Door |
IP Grade: | IP55 | Operating Temperature: | - 40℃~+75℃ |
Cooling Method: | AC220V 150W/K Heat Exchanger And Fan | Cable Inlet: | On The Bottom Front And Back |
Relative Humidity: | 5% ~ 100% | Air Pressure: | 62kpa ~ 101kpa(similar To 0m ~ 5000m Altitude) |
Highlight: | Sunproof Outdoor Power Cabinet,rainproof Outdoor Power Cabinet,IP55 Telecommunication Enclosure |
IP55 Sandwich Structure Panel Front Rear Access Heat Exchnager Cooling Outdoor Power Cabinet Telecommunication Enclosure
1. Application
The ET9090210-UP9 Outdoor Power Cabinet is mainly used in wireless communication base station, such as 5G system, communication/network integrated service, access/transmission switching station, emergency communication/transmission, etc. The cabinet can contain rectifier system, UPS, inverter, battery etc
2. Description
This cabinet have 20U 19 inch space and 2 layer battery shelves, use Sandwich structure panel, galvanized steel material, one front door and one rear door. Adopt heat exchanger for cooling. All the screw is high corrosion resistance stainless steel material.
3. Features
(1) The cabinet is dustproof, sunproof fireproof and rainproof, which is used in outdoor environment.
(2) Cabinet cooling: heat exchanger. (Other cooling option: air conditioner and fans). MTBF≥50000h
(3) The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. There are cable inlet individually for power cable, signal cable and optical cable.
(4) All the cables used in the cabinet are made from flame retardant materials.
(5) Use outdoor powder coating with high anti-corrosion.
4. Technical Parameters
Item | Type | Technical Parameter |
Structure | Dimension | External Dimension: W×D×H 900×900×2100mm |
Layout | 1 compartment, the upper cabin is for 19” equipment, the lower cabin is for battery | |
Equipment Installation Method | 19” rack and battery shelf | |
Door | With one front door and one rear door, and anti-theft three point lock for outdoor cabinet (support padlock). | |
Material | Sandwich structure panel | |
Ingress Protection | IP55 | |
Temperature Control | Cooling | AC220V 150W/K heat exchanger |
Lighting | LED lamp | AC220V LED lamp |
Temperature | Temperature | Working Temperature: -40°C ~ +55°C |
Storage Temperature: -50°C ~ + 70°C | ||
Transport Temperature: -50°C ~ +70°C | ||
Humidity | Relative Humidity | 5% ~ 100% |
Pressure | Air Pressure | 62kpa ~ 101kpa (similar to 0m ~ 5000m altitude) |
Radiation Intensity | Solar Radiation Intensity | 1120 ×(1±5%)W/m2 |
5. Accessories List
No. | Item | Quantity | Unit | Specs |
1 | Outdoor Telecom Cabinet | 1 | PC |
(1) External Dimension: W×D×H 900×900×2100mm (2) Including cable entry on the bottom (3) Including grounding copper bar |
2 | Heat Exchanger | 1 | SET | AC220V 50Hz 150W/K |
3 | Fan | 1 | SET | Two AC220V fans with one temperature controller |
4 | LED Lamp | 1 | PC | AC220V, for illumination inside cabinet |
5 | LED Lamp Switch | 1 | PC | For controlling LED lamp on/off |
6 | Environment Monitoring System | 1 | SET |
1* environment monitoring unit, 1U,SNMP communication; 1* smoke sensor; 1* water sensor; 1* temperature&humidity sensor; 2* door sensor Power Supply: 220VAC |
7 | Socket | 1 | PC | 8 -bit universal socket, 220V 16A |
8 | Package | 1 | PC | Wooden Case |
6. Cabinet Picture
7. Drawing
8. Cabinet Details
9. Packing
Contact Person: Fiona Liang
Tel: +8613752765943 / 86-0755 23592644