Single Wall Galvanized Steel Outdoor Communication Cabinets Grey RAL 7035 Color
1. Product Overview
This series outdoor cabinet is well suited for electronic equipment, batteries, telecom gear, all integrated in to a robust, economical package. The cabinet is also well suited for areas that require limited equipment installation, as a stand-alone power for site-power applications or a battery solution for additional growth.
2. Product Parameters
|External Size||W*D*H 800*700*1000mm|
|Material||Galvanized steel,single wall with insulation|
|Cabinet Structure||One compartment|
|Cable Entry||From cabinet bottom|
|Illumination||DC48V LED lamp|
|Grounding Protection||Copper bar|
|Cooling System||AC220V Air Conditioner,500W cooling capacity.|
|Coating||Anti-corrosion outdoor powder coating|
|Alarm sensors||The door sensor, water sensor, smoke sensor, temperature and humidity sensor, vibration sensor|
|Flame retardant||Comply with GB5169.7 test A|
|Door type||With one front door, and anti-theft three point lock for outdoor cabinet (support padlock).|
|Cabinet Lock||Anti-theft three point lock(support padlock)|
|Mounting type||Floor mount|
|Package||Wooden case with pallets|
3.1 Cabinet Material
The cabinet is made of galvanized steel, with double walls, thickness of outer plate: 1.5mm, thickness of inner plate: 0.8mm. There are heat insulation between inner wall and outer wall. The insulation material is 20mm PEF, heat insulation coefficient: 0.035W/m·K. The cabinet is assembled type.
3.2 Cabinet Structure
The cabinet includes 19” equipment installation rack. The cabinet includes one air conditioner, installed on front door.
4. Cabinet Door and Lock
The cabinet includes one front door. The cabinet door uses embedded structure. The door opening angle is larger than 110°and the door limit device can limit the opening angle. The lock is theftproof three point lock, supporting padlock.
Door lock theft proof design:Damage resistance of the theft proof lock meets GA/T 73-1994 “Mechanical Anti-theft Lock” class B requirement, supporting padlock.
5. Cable Inlet
Feeder cable and other external cables all use bottom wiring method.
6. Connection and Fastening