|
Product Details:
Payment & Shipping Terms:
|
| Frequency: | 45–66 Hz | Rated Input Current: | ≤10 A |
|---|---|---|---|
| Operating Voltage: | 85–300 V AC | Output Voltage: | 42–58 V DC |
| Operating Temperature: | -40ºC To +75 ºC | Output Power: | 1740W (176–300 VAC) |
| Highlight: | telecom rectifier module,dc rectifier system |
||
85–300 VAC Input Voltage Digital Rectifier With High Efficiency And Power Density
1. Product Description
The R4830N2 is a digital rectifier with high efficiency and power density. It converts 85–300 V AC input
voltage to 53.5 V DC output voltage. The output voltage can be adjusted by the host. It performs comprehensive protection functions, supports soft start, and produces low noise. With the latest power monitoring technology, states of the rectifier and load are monitored in real time. Multiple rectifiers can be paralleled.
2. Key Features
• Input voltage range: 85–300 V AC
• Operating temperature range: –40ºC to +75ºC
• Total harmonic distortion (THD): ≤ 3.5％
• Digital control mode
• Hot swap
• Supports intelligent electric meter
• Supports CAN communication
• Supports LED display
• Supports voltage adjustment, current adjustment, and current sharing
• Meet Rohs requirement
• Passes the TUV, CE, UL certifications and gets the CB certificate.
• Disconnect above 320 VAC
3. Electrical Specifications
| Item | Specification | |
| Input | Operating voltage | 85–300 V AC |
| Frequency | 45–66 Hz | |
| Rated input current | ≤10 A | |
| Power factor | ≥0.99 (load ≥ 50%) | |
| THD | ≤3.5% (full load) ≤5% (load ≥ 50%) |
|
| output | Output voltage | 42–58 V DC Rated voltage: 53.5 V DC |
| Output power | 1740 W (176–300 V AC); 755 W (85–175 V AC decreased linearly) |
|
| Regulated voltage precision | ≤±0.6%Vo | |
| Ripple and noise | ≤200mVp-p (Bandwidth ≤ 20MHz) |
|
| Dynamic response | • 25-50% or 50-75% load −Over shoot: ≤±5% −Recovery time: ≤ 200 us (±0.6%) • 10-90% load; −Over shoot: ≤±5%; −Recovery time: ≤ 1ms (±1%) |
|
| Standby power | ≤ 5 W | |
| Turn-on output delay | 3–8s | |
| Hold up time | >10 ms | |
| Psophometrically weighted noise |
≤2 mV | |
| Wideband noise voltage | ≤50 mV (3.4–150 kHz) ≤20 mV (0.15–30 MHz) |
4.Environmental Specifications
5. Product Pictures
Contact Person: Fiona Liang
Tel: +8613752765943 / 86-0755 23592644
| Factory Address:No.6 Qifen Street, Liaobu Town, Dongguan, Guangdong, China | |
| Sales office:3A-8, SHUIWAN 1979 SQUARE (PHASE II), NO. III, TAIZI ROAD, SHUIWAN COMMUNITY, ZHAOSHANG STREET, NANSHAN DISTRICT, SHENZHEN | |
| +00-86-13752765943 | |
| info@estel.com.cn | |
