Product Details:
Payment & Shipping Terms:
|
Mounting Method: | Embeded | Input Voltage: | -48VDC |
---|---|---|---|
Cooling Capacity L35/L35: | 100W/K | Ingress Protection: | IP55 |
Certificates: | CE | Refrigerant: | R134A |
Highlight: | cabinet heat exchanger,fan heat exchanger |
IP55 DC48V 100W/K Enclosure Heat Exchanger
1. Key Features
2. Product Parameters
Type | Parameters |
Dimensions (Include flange) | 1080*560*200mm |
Dimensions(Without flange) | 1040*510*200mm |
Weight | 40kg |
Mounting method | Embedded |
Application temperature | -40℃ -70 ℃ |
Working temperature | -40℃ -65 ℃ |
Input voltage | -48VDC |
Cooling capacity L35/L35 | 100 W/K |
Power consumption L35/L35 | 190 W |
Airflow | 600 m3/h |
IP grade | IP55 |
Refrigerant | R134A |
Noise | 65 dB(A) |
Surface treatment | RAL7035 |
3. Product System
4. Installation instructions
In order to avoid short circuit of air duct, it is suggested to make effective isolation between inner air inlet and outlet.
This product is free of cover, customers don’t need to install additional cover.
1. If the customer needs to in-stall a protective cover, in order to ensure enough circulation of air, the opening rate of the air inlet and outlet should be greater than 60%. It is very important to prolong the unit life and reduce the maintenance frequency.
2. The air inlet and outlet of the protective cover should pre-vent short circuit of air duct, so that the air-con can get the best cooling effect.
Contact Person: Fiona Liang
Tel: +8613752765943 / 86-0755 23592644