Sunproof Rainproof Outdoor Telecom Cabinet Wall Mounted 19 Inch Rack Enclosure
Product Details
telecom equipment cabinet
,outdoor telecom enclosure
,Rainproof Telecom Cabinet
Sunproof Rainproof Outdoor Telecom Cabinet Wall Mounted 19 Inch Rack Enclosure
1. Cabinet Overview
Outdoor Enclosure offers standard 19” racking rails, is a new design for telecom projects and surveillance projects. These enclosures have provision of floor mounting. This series enclosures offer all the protection needed for outdoor requirements.Ultimate security is provided by a three-point locking system.
2. Specifications
| External Size |
External Dimension optional : W*D*H 1200*600*900mm |
|
Cabinet Layout |
Two compartments for installing 19” equipment |
|
Material |
Single layer aluminum sheet |
| Equipment Installation Method |
19” rack |
| Protection Level |
IP55 |
| Cabinet Inlets |
From cabinet bottom |
| Illumination/lighting | DC48V LED lamp |
| Heat Insulation | PEF |
|
Grounding Protection |
Copper bar |
|
Color |
Grey (support custom made) |
|
Cooling System |
AC220V Air Conditioner |
|
Coating |
Anti-corrosion outdoor powder coating |
|
Alarm sensors |
The door sensor, water sensor, smoke sensor, temperature and humidity sensor |
| Flame retardant | Comply with GB5169.7 test A |
| Door type | With 2front doors and 1 side door |
|
Cabinet Lock |
Anti-theft three point lock(support padlock) |
| Package | Wooden case with pallets |
| Certificates | CE |
| Temperature | Working Temperature: -40°C ~ +55°C |
| Storage Temperature: -50°C ~ + 70°C | |
|
Transport Temperature: -50°C ~ +70°C |
3. Components Installation
31 LED lamp, smoke sensor and door sensor are installed at the top of the enclosure.
Environment Monitoring Unit and PDU are installed on 19” rack.
32 Air Conditioners and fans are installed on the door of the enclosure.
4. Theft Proof Design
4.1 Three point lock theft proof design
Damage resistance of the theft proof lock meets GA/T 73-1994 “Mechanical Anti-theft Lock” class B requirement, supporting padlock.
4.2 Connection and fastening
(1) Use anti-loose threaded connection as structure and bearer connection.Anchor bolt for fixing cabinet use hot dip galvanized bolts.
(2) Door hings use inner hinge mode.
5. Factory Introduction
Factory Size: 3000 Square Meters
No. of Main Production Lines: 5
Contract Manufacturing: OEM Service Offered, Design Service Offered, Buyer Label Offered
Production Experience: 13 Years
6. Leading Time
Usually about 10-15 days. The exact lead time need to be confirmed according to the quantity of order.
-
28U Intergrated Outdoor Power Cabinet With Rectifier System UPS Battery Energy Storage Enclosure
28U Intergrated Outdoor Power Cabinet With Rectifier System UPS Battery Energy Storage 1. Brief introduction: Outdoor telecom cabinets typically come with a range of features to ensure the protection and functionality of the telecom equipment. Some common features of outdoor telecom cabinets include... -
Outdoor Power Cabinet , Outdoor Telecom Cabinet With Water Sensor / Door Sensor
Outdoor Power Cabinet, Outdoor Telecom Cabinet With Water Sensor / Door Sensor 1. Description The cabinet is one compartment cabinet. The cabinet cooling use air conditioner and heat exchanger, to ensure the equipments operate normally at stable temperature range, so as to make the service life of ... -
Temperature Control Outdoor Telecom Cabinet IP55 Ingress Protection With Generator Socket
Temperature Control Outdoor Power Cabinet / Outdoor Telecom Cabinet With Generator Socket 1. Specifications (1) Technical Parameters Ingress Protection: IP55 Grade B Lightning Proof: Nominal: 60KA, Max.: 100KA Temperature: Working Temperature: -40°C ~ +55°C Storage Temperature: -50°C ~ + 70°C ... -
Emerson Rectifier / Battery Outdoor Power Cabinet Sandwich Structure Panel IP55
Sandwich Structure Panel Outdoor Power Supply Cabinet With Emerson Rectifier and Battery 1 Product description 1.1 Appearance After the cabinet is installed, as shown in Figure 1 and Figure 2 Figure 1 Figure 2 1.2 Cabinet configuration The outdoor integrated cabinet configuration of this project is ...
