Payment & Shipping Terms:
|Material:||Galvanized Steel Single Wall||Alarm Sensors:||Water Sensor, Smoke Sensor, Temperature And Humidity Sensor ,Shock Sensor ,Door Sensor|
|Door Lock:||Anti-theft There Point Doorlock||Door Type:||With One Front Door|
telecom equipment cabinet,
outdoor telecom enclosure
Double Wall Outdoor Telecom Cabinet Fans Temperature Control With One Front Door
1. Cabinet Applications
This series outdoor cabinet is mainly used in communication base station, such as 4G/5G system, communication integrated service, access/transmission switching station, emergency transmission, etc.
2. Cabinet Introduction
2.1 Cabinet Applications
The cabinet is made of galvanized steel, single wall, thickness: 1.5mm, without thermal insulation.
2.2 Cabinet Structure
The cabinet includes 19” mounting rack from top to down, without battery tray.
2.3 Cabinet Door and Lock
The cabinet includes one front door and one back door, totally two doors. The cabinet door uses embedded structure. The door opening angle is up to 120°and the door limit device can limit the opening angle. The lock is theftproof four point lock, supporting padlock. Include keys for opening the door.
3. Cabinet Description
The cabinet is dustproof, sunproof and rainproof, used in outdoor environment.The cabinet cooling uses fan.and including two 48VDC illumination LED lamp, installed on cabinet top. The cabinet includes smoke detector and door switch.The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding.There are cable inlets at the bottom of the cabinet.
4. Cabinet Features
4.1 Used in outdoor environment
4.2 Material: good quality galvanized steel
4.3 Surface treatment: powder-coat paint, outdoor polyester light gray RAL 7035 coating
4.4 Ingress protection: IP55
4.5 Flame retardance: comply with GB5169.7 test A
4.6 Insulation resistance: the insulation resistance between grounding devices and cabinet body parts is
not lower than 2×104M/500V(DC).
4.7 Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not
lower than 3000V(DC)/1min.
5. Cabinet Pictures
Contact Person: Fiona Liang
Tel: 86-13752765943 / 86-0755 23592644