|
Product Details:
Payment & Shipping Terms:
|
| Charging Connector: | CCS2 | Output Voltage: | 750V Max |
|---|---|---|---|
| Output Current: | 50A DC Max | Output Power: | 30 KW DC Max |
| Input Current: | 63A Max | Enclosure Protection: | IP54 |
| Highlight: | 30kW EV DC Fast Charging Station,750V EV DC Fast Charging Station,EV Wall Box Charger With CCS2 Connector |
||
30kW 750V DC Fast Charging Of New Energy EV Wall Box Charger With CCS2 Charging Connector
30kW 750V DC Fast Charging Of New Energy EV Wall Box Charger Introduction
The DC charger is in compliance with IEC 61851-1:2017, EN 61851-1:2010, EN61851-23:2014, EN61851-24:2014, IEC61851-21-2:2018, GB/T18487.1-2015, and the corresponding communication standards GB/T 27930-2015, GB/T 34657.1-2017, GB/T 34658-2017. The communication protocol with central management system (CMS) is in compliance with OCPP 1.6 based on ARM architecture and Linux / Android platform.
The basic design of this DC charger series is in compliance with the IEC standards.
30kW 750V DC Fast Charging Of New Energy EV Wall Box Charger Features:
30kW 750V DC Fast Charging Of New Energy EV Wall Box Charger Parameter
Input Parameter
| Voltage | 380/400 VAC, +/-10% |
| FLA /Max input Current | 63A |
| Frequency | 50/60Hz |
| Wiring | L1, L2, L3, N, PE |
| Power factor | >99%(Rated input ) |
| Harmonic current/ iTHD | <5% (Rated input ) |
Output Parameter
| Max Output Power | 30 kW DC |
| Output Voltage | 200 V--750VDC |
| Max Output Current | 50A DC |
| Power Module Slots | 1 |
| Voltage stabilized accuracy | <±0.5% |
| Outlet Type |
1*50A CCS2 Remark: only one gun is available in a charging session. |
| Load sharing | ±3% |
System Parameter
| Efficiency | >94% |
| KAIC | 6kA |
| Enclosure protection | IP54 |
Operation Environment
| Ambient temperature |
-20 ~ +50℃, full power output below 50℃ Power derating 5% /℃ above 50℃ |
| Storage temperature | -40 ~ +75°C |
| Operating humidity | 0 ~ 95% (No condensation) |
| Operational altitude | 0 ~ 2000 m |
HMI Interface
| Display | 7" LCD/Touch Screen, |
| LED | RUN(G) /ALARM(R) |
| Power metering | 1 *DC meter |
| Emergency stop | E-stop to shut down both AC input and DC output at same time |
Monitoring Interface
| Wide Area Network | Ethernet (standard); Wi-Fi, 4G (optional) |
| Communication Protocols | OCPP 1.6 |
Protection Function
| System protection |
Overcurrent protection, Short circuit protection, Input/ Output Overvoltage protection, Input Undervoltage protection Insulation monitoring Two DC connector output common ground protection Reverse polarity protection, Over temperature protection, |
Mechanical Feature
| Dimension(W*H*D mm) | 380(W)*520(H)*200(D)(mm) |
| Charger Weight | 45kg (without power module,without Packing) |
30kW 750V DC Fast Charging Of New Energy EV Wall Box Charger Product Details
PROJECTS CASE PRESENTATION
Contact Person: Ms. Fiona Liang
Tel: +8613752765943 / 86-0755 23592644
| Factory Address:No.6 Qifen Street, Liaobu Town, Dongguan, Guangdong, China | |
| Sales office:3A-8, SHUIWAN 1979 SQUARE (PHASE II), NO. III, TAIZI ROAD, SHUIWAN COMMUNITY, ZHAOSHANG STREET, NANSHAN DISTRICT, SHENZHEN | |
| +00-86-13752765943 | |
| info@estel.com.cn | |
