Product Details:
Payment & Shipping Terms:
|
Applicaiton: | Outdoor Communication | Structure: | Assembled |
---|---|---|---|
Coating: | Anti-corrosion Outdoor Powder Coating | Illumination: | 48V LED Lamps (immovable), With Protective Circuit Breaker |
External Size: | H×W×D 1800×800×800mm | Material: | Galvanized Steel; Sandwich Struture Panel, Double Wall With Heat Insulation |
Ingress Protection: | IP55 | Lock: | Anti-theft Three Point (support Padlock) |
High Light: | outdoor equipment cabinet,power supply cabinet |
Good Sealing Anti Theft Outdoor Equipment Enclosure Telecom Ups Battery Charging
1. Application
The Outdoor Telecom Cabinet can be used under different conditions: gale, rain, snow, hail, frost, smog and solar radiate etc, providing outdoor physical work environment and safety system for wireless telecom station or wired network station. Operators without permission are not allowed to get access to the cabinet.
ESTEL’s Energy Saving Integrated Cabinet provides complete solutions for outdoor working environment and safety management of telecom base station. As a base station, it can integrate the main equipments, system power supply, AC and DC power distribution, environment monitoring, batteries, lightning protection and grounding devices. As functional cabinet (battery cabinet, power supply cabinet, transmission cabinet etc.), it can help telecom carriers to realize easy station obtaining, energy saving, fast deployment.
2. Technical Parameters and Accessories
Item | Type | Technical Parameter |
Structure | Dimension | External Size W×D×H 800×850×1800mm |
Layout | 1 compartment, the upper part is equipment UPS compartment, the lower part is battery compartment | |
Equipment Installation Method | Upper compartment: 19” rack; Lower compartment: battery shelf. | |
Door | With one front door, and special lock for outdoor cabinet , anti-theft three point (support padlock) | |
Material | Galvanized steel; sandwich struture panel, double wall with heat insulation | |
Heat Insulation | There are heat insulation between inner wall and outer wall. The insulation material is PEF. | |
Ingress Protection | IP55 | |
Temperature Control | Cooling | 2 DC48V fans, on the top |
Lighting
|
LED Lamp | DC48V LED lamp |
LED Lamp Sensor | Used for controlling LED lamp | |
Accessories | Sensors | Door sensor for open door alarm, smoke sensor |
Temperature | Temperature | Working Temperature: -40°C ~ +55°C |
Storage Temperature: -50°C ~ + 70°C | ||
Transport Temperature: -50°C ~ +70°C | ||
Humidity | Relative Humidity | 5% ~ 100% |
Pressure | Air Pressure | 62kpa ~ 101kpa (similar to 0m ~ 5000m altitude) |
Radiation Intensity | Solar Radiation Intensity |
1120 ×(1±5%)W/m2 |
3. Features
(1) Theft Proof
● Inside installation, inside fixing, no outer screws
● Anti-theft three point lock
● Inside door hinges, multiple protection
● Embedded cabinet door, theft proof
(2) Protection
● Integrated top cover, good seal, water proof
● Protection Grade: IP55
● High stability, anti-UV radiation
● Anti-corrosion
●Surface treatment: degreasing, derusting, rustproof phosphating (or galvanizing), powder coated.
(3)Alarm
● Smoke, open door, water, temperature & humidity, AC power failure alarm
● Remote communication interfaces, transmitting alarms to remote control center
(4) Heat insulation
● Sandwich structure insulates the outer heat conduct, keeping temperature inside cabinet without abrupt change, anti-condensation, reducing heat management energy consumption.
● High performance PEF insulation material
(5) The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. At the bottom of the cabinet, there are cable inlets separately for power cable, signal cable and optical cable.
(6) All the cables, sealing and heat insulation used in the cabinet are made from flame retardant materials.
(7) Flame retardance: comply with GB5169.7 test A
4.1 LED lamp, smoke sensor, door sensor and fans are installed at the top of the cabinet.
4.2 Cable Entry
4.3 Grounding Protection
The cabinet includes grounding copper bar with anti-corrosion coating. There are enough screws for wiring connection terminals.
The metal part of the cabinet should be interconnected and be connected with grounding bar. Connection resistance between any two points is lower than 0.1Ω.
Protective earthing of other equipments inside the cabinet should be connected to the grounding bar.
5. Theft Proof Three Point Lock Design
7. Factory Introduction
Our factory has 14 years history, it covers an area of 3000 square meters. We support OEM Service Offered, Design Service Offered, Buyer Label Offered
Main Production Line
8. Packing
The cabinet is packed with wooden case.
Contact Person: Fiona Liang
Tel: +8613752765943 / 86-0755 23592644