Payment & Shipping Terms:
|Install Method:||Pole Mounted||Inner Structure:||The Upper Part Is Equipment Bay, The Lower Part Is Battery Bay|
|Cooling:||Air Conditioner||Material:||Galvanized Steel|
|Steel Structure:||Double Wall With Insulation||External Size:||W×D×H 800×800×1000mm|
outdoor pole mount enclosure,
outdoor electronics cabinet
Outdoor Pole Mounted Telecom Cabinet / Small Enclosure For Pole Mount With 19 Inch Rack Battery Shelf
The ET8080100-P Pole Mounted Outdoor Telecom Cabinet is widely used in wireless communication base station, such as 4G system, communication/network integrated service, access/transmission switching station, emergency communication/transmission, etc.
Suitable for outdoor environment, such as roadside, park, remote mountain area, building roof. The cabinet can install base station equipment, power equipment, battery, temperature control equipment, transmission equipment and other matching equipment or reserve space and heat exchange capacity for the above equipments, can provide reliable mechanical and environmental protection for the normal operation of internal equipment.
2.1 The cabinet is dustproof, sunproof and rainproof, which is used in outdoor environment.
2.2 The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. There’re entrance holes individually for power cable, signal cable and optical cable.
2.3 All the cables used in the cabinet are made from flame retardant materials.
2.4 Perfect protection
● Integrated top cover, good seal, water proof
● Protection Grade: IP55
● High stability, anti-UV radiation
2.5 Heat Insulation
● Sandwich structure insulates the outer heat conduct, keeping temperature inside cabinet without abrupt change, anti-condensation, reducing heat management energy consumption.
● High performance PEF insulation material
2.6 Theft Proof
●Inside Installation, inside fixing, no outer screws
● Anti-theft three point lock
● Inside door hinges, multiple protection
(1) Technical Parameters
|Structure||Dimension||External Dimension: W×D×H 800x800x1000mm Internal Dimension: W×D×H 750x730x880mm|
|Equipment Installation Method||19” standard rack and battery shelf|
|Door||With one front door, and anti-theft three point lock for outdoor cabinet (support padlock)|
2.Double wall with 20mm PEF heat insulation between two walls.
|Temperature Control||Cooling||Air conditioner|
|Lighting||LED lamp||48V LED lamp|
|Temperature||Temperature||Working Temperature: -20°C ~ 55°C|
|Storage Temperature: -40°C ~ + 70°C|
|Transport Temperature: -50°C ~ +70°C|
|Humidity||Relative Humidity||5% ~ 100%|
|Pressure||Air Pressure||62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)|
|Radiation Intensity||Solar Radiation Intensity||1124 × (1±5%)W/m2|
(2) Accessories List
|1||Outdoor Pole Mounted Cabinet||1||Set||
(1) External Dimension: W×D×H 800×800×1000mm
Internal Dimension: W×D×H 750×730×880mm
(2)1 compartment: the upper part is 19" equipment bay,inlcuding 19" installation rail; the lower part is battery bay, including battery shelf.
(3) With one front door, and anti-theft three point lock for outdoor cabinet (support padlock) (4) Material: galvanized steel, double wall; 1.5mm thick outer wall, 0.8mm thick inner wall, the insulation between two wall is 20mm PEF.
(5) Installation method: pole mount, inlcuding pole installation accessories.
(6) Including grounding bar
(7) including cable entry at the bottom
|2||Air Conditioner||1||Set||Cooling capacity: 500W, Power supply: AC220V 60Hz|
|4||LED Lamp Sensor||1||PC||Used for controlling LED lamp on /off|
4. Dimension Diagram
Cabinet External Size : 800×800×1000mm (W×D×H),
Cabinet Internal Size : 750×730×880mm (W×D×H)
5. Cabinet Layout
Contact Person: Fiona