|
Product Details:
Payment & Shipping Terms:
|
| Material: | High Quality Galvanized Steel | Walls: | Galvanized Steel, 1.2mm Thickness, Single Wall |
|---|---|---|---|
| Insulation Material: | 20mm PEF | Compartment: | 1 |
| Door: | With One Front Door | LED: | 48VDC LED |
| IP Grade: | IP55 | Cooling System: | 1500w Air Conditioner And Fan |
| Size: | H1750mm×W750mm×D750mm | Battery Rack: | 19 Inch Battery Rack |
| High Light: | Outdoor Telecom Rack Cabine,Outdoor Telecom Cabinet Customized,Telecom Cabinet With Sensors |
||
32U Outdoor 19 Inch Rack Cabine Telecom Cabinet with PDU
1.32U telecom Cabinet Introduction
The outdoor cabinet is widely used in telecom operators’ mobile telecommunication sites, outdoor small shelters, railway electrical control cabinets, electronic police, communication base stations, outdoor air detection stations, solar control cabinets,etc.
2.Cabinet Features
-Ingress protection is IP55, we can provide IP65 cabinet based on client’s actual.
-Made of heavy gauge galvanized material.
-Front door use standard three-point anti-theft lock. The door lock forms an upper, middle and lower three-point locking structure. For the cabinet with large area, the locking effect is safe and reliable.
-Standard 19 inch mounting posts.
-Doors secured with steel dead locking system lock (support PADLOCK)
-It is installed in the ground root or above ground column base system by "direct burying"
-Cable entry is via the base as standard with side or roof entry available upon request.
3. Cabinet Instructions
For those who need more than just standard cabinet, this series can also offer a truly the security of customized solution with lots of available options, providing a climate-controlled environment for any electronic equipment, electrical load panels and cable entry solutions. It provides a secure,climate controlled environment for any electronic equipment.
This battery cabinet is 1750mm High and750mm Wide and 750mm Deep. This cabinet is the ultimate choice for outdoor racking requirements.
| Standard | Description |
| GB/T 17626.7-1998 | Electromagnetic compatibility |
| GB4706.1 | Safety of household appliance and electrical appliance with similar use. |
| GB4798.1 | Environmental conditions existing in the application for electric and electronic products - storage |
| GB4798.2 | Environmental conditions existing in the application for electric and electronic products - transportation |
| GB4798.3 | Environmental conditions existing in the application for electric and electronic products - usage |
5.Cabinet Technical Parameters
| Configuration | Item | Technical Parameter | |
| Cabinet | Model | ET7575175-EQ | |
| Protection Level | IP55 | ||
| External Dimension | H1750mm×W750mm×D750mm ( can be customized) | ||
| Internal Dimension | 19 inch rail,32U | ||
| Material | Galvanized steel, 1.2mm thickness, single wall. Thickness of bearing parts: 2.0mm | ||
| Insulation | PEF (optional) | ||
| Coating | Polyester powder coating | ||
| Color | RAL7035 | ||
| Lock | Anti-theft three-point locking system | ||
| Hinge | Inner hinge | ||
| Installation Options | Floor mounted | ||
| Cable Routing | Cable in and out from the bottom of cabinet | ||
| Maintenance | One front door, front maintenance | ||
| Cooling | Options | AC air conditioner | Fan |
| Cooling Capacity | 1500W | 180CFM | |
| Input Voltage | 220VAC 50HZ | 48VDC | |
| Communication | RS485 | / | |
| Temperature Controller | 48V fan temperature controller | ||
| Power Distribution Unit | B Grade lightning Proof | ||
| AC Intput | 63A/2P ×1(optional) | ||
| AC Output | 16A/1P×4 (optional) | ||
| DC Output | 16A/1P×4. (optional) | ||
| Sensors | 1 x smoke sensor, 1 x water sensor, 1 x temperature and humidity sensor, 1 x door sendor, 1 x vibration sensor. |
||
| Others | 48VDC LED lamp for illumination | ||
| Environment | Working Temperature | -40℃ ~+55℃ (+Solar Radiation) | |
| Storage Temperature | -40℃~+70℃ | ||
| Working Humidity | 5%~95%(No condensation) | ||
| Working Altitude | 0~4000 meters | ||
6.Cabinet Pictures
7.Air conditioner Datasheet:
2) The air conditioner is one kind of refrigeration product self-developed for cabinet. It is applicable in the place where the cabinet internal heat is very large, the internal electronic equipment is sensitive to the environment temperature and which should be isolated internally and externally completely. This product has multiple functions, high reliability, and has the feature that it can start to work without complex debugging after powering.
3) The fan in the internal cycle air path absorbs the hot air from the upside to make air heat exchange by evaporator fins, and sends the cooled air from the downside of the air conditioner. By so, the air in cabinet can cycle to achieve the purpose of lowering the temperature. Meanwhile, The fan in the external cycle air path absorbs the external cold air from the downside, and discharges the hot air from the upside after heat exchange.
4)
5) Air conditioner technology parameters
| Item | Name | Unit | Parameter |
| Dimension and installation | Body outline dimension (height*width*depth ) | mm | 750*450*200 |
|
Outline dimension including flange(height*width*depth ) |
mm | 784*484*200 | |
| Weight | Kg | 24 | |
| Installation method | Door Mounted | ||
| Installation method | Outdoor | ||
| Environment and protection | Working environment temperature | ℃ | -40 to +55 |
| Noise | dB(A) | 65 | |
| Life expectancy | Years | >10 | |
| IP grade | IP55 | ||
| Refrigerant | R134a | ||
| ROHS certification | yes | ||
| Performance | Input voltage range | 220±15%VAC~50Hz | |
| Refrigerating capacity(L35/L35) | W | 1500 | |
| Rated Refrigerating input power(L35/L35) | W | 580 | |
| Rated Refrigerating current (L35/L35) | A | 2.6 | |
| Maximum Refrigerating current | A | 4.6 | |
| Heat capacity(optional) | W | 1000 | |
| Air Volume of Inner Circulation | m3/h | 320 | |
8.Various cooling system for your choice
9.Packing and Shipping
Cabinet package use free fumigation woodcase which is suitable for export. This package is anti moisture, anti impact and srong to ensure safe transportation.
10.Payment & Shipping Terms:
| Minimum Order Quantity: | 1 set |
| Price: | negotiation |
| Payment Terms: | L/C,D/A,T/T, Western Union, Paypal, etc |
| Supply Ability: | 5,000 sets per month |
| Delivery Time: | 10-15 working days |
| Packaging Details: | wooden case |
| Shipping: | by sea, by air, by courier, by land, by train, etc. |
Contact Person: Fiona Liang
Tel: 86-13752765943 / 86-0755 23592644
| Factory Address:Building No. 1, No.6 Qifen Street, Liaobu Town, Dongguan, Guangdong, China | |
| Sales office:Shenzhen, China | |
| +00-86-13752765943 | |
| info@estel.com.cn | |
