Product Details:
Payment & Shipping Terms:
|
| Connector A: | MTP | Fiber Mode: | OM3 50/125μm |
|---|---|---|---|
| Polish Type: | UPC To UPC | Insertion Loss: | 0.35dB/0.6dB |
| Attenuation At 850nm: | ≤2.3dB/km | Cable Diameter: | 3.0mm |
| Installation Tensile Load: | 100 N | Operating Temperature: | -10°C To +70°C |
| Connector B: | MTP | Wavelength: | 850/1300nm |
| Minimum Bend Radius: | 7.5mm | Return Loss: | ≥20dB |
| Attenuation At 1300nm: | ≤0.6dB/km | Cable Jacket: | OFNP/LSZH |
| Long-Term Tensile Load: | 50 N | Storage Temperature: | -40°C To +85°C |
| High Light: | single mode fiber patch cord,single mode fiber patch cables |
||
MTP trunk assemblies are typically used to connect fiber optic transceivers, MTP cassettes and fiber adapter panels, etc., offering enhanced networking flexibility in meeting current infrastructure requirements and facilitating moves, adds and changes for future data centers demands.
US Conec‘s MTP connectors are fully compliant with IEC Standard 61754-7 and TIA 604-5 – Type MPO.
Designed to withstand tight bends and challenging cabling routes with substantially less signal loss.
7.5mm minimum bend radius, allowing tighter cable routing without impacting system performance.
Advanced cabling customization done to your specifications .
Master fiber polarity knowledge to manage and optimize your network and connection. Kindly note that you can refer to the datasheet MTP/MPO fiber cable polarity if you have any interest or question in polarity.
FS.COM provides four different staggered breakout length arrangements shown as below.
Comprehensive performance testing system ensures more secure operation and keeps more stable and reliable data connection.
Contact Person: Fiona
| Factory Address:Shenzhen, China (Mainland) | |
| Sales office:Building 3, Second Industrial Zone, Guangming Road, Shiyan, Bao'an District, Shenzhen, Guangdong, China | |
| +00-86-13752765943 | |
| info@estel.com.cn | |
