Payment & Shipping Terms:
|Connector A:||MTP Female (pinless)||Fiber Mode:||OS2 9/125μm SM|
|Polish Type:||APC To APC||Insertion Loss:||0.35dB Max (0.15dB Typ.)|
|Attenuation At 850nm:||≤0.32dB/km||Jacket OD:||3.0mm|
|Installation Tensile Load:||100 N||Storage Temperature:||-40°C To +85°C|
|Connector B:||MTP Female (pinless)||Wavelength:||1310/1550nm|
|Minimum Bend Radius:||10mm||Return Loss:||≥60dB|
|Attenuation At 1300nm:||≤0.18dB/km||Cable Jacket:||Plenum (OFNP)|
|Long-Term Tensile Load:||50 N||Operating Temperature:||-10°C To +70°C|
optical patch cord,
single mode fiber patch cables
How to connect two switches with 40G PLR4 transceivers directly? A type B female MTP to female MTP is required. Figure 1 shows two switches connected by a MTP female cable.
|1||37016||Cisco QSFP-4X10G-LR-S Compatible 4x10GBASE-LR QSFP+ 1310nm 10km MTP/MPO DOM Transceiver|
|2||68018||1m (3ft) MTP Female to Female 12 Fibers OS2 Trunk Cable, Type B|
|3||35209||Generic Compatible 40GBASE-PLR4 QSFP+ 1310nm 10km MTP/MPO Transceiver for SMF|
|4||29123||S5850-48S6Q (48*10GE+6*40GE) High Performance Data Center Switch|
US Conec MTP connector features the industry's highest-precision thermoplastic ferrule, designed to 0.35dB Max. IL.
This full-spectrum fiber has bend performance that exceeds the ITU-T Recommendation G.657.A1 standard and still splices the same as the installed base of standard single-mode fibers.
Plenum cables are purposefully built with jacket materials that give off low amounts of smoke and retard flames spread, making sure the cables are safe and heat-resistant.
With BIF, our cable is designed for improved bend performance in reduced-radius applications such as residential or office environments which have less bend sensitivity.
3D interferometer provides verification of MTP/MPO polishing process, and making all parameters of the polished MT ferrule complies and exceeds industry standards. Clean optical connectors are paramount in providing a reliable, high-performance fiber optic infrastructure.
This easy to take and well-protected fiber optical cable package has been labeled and marked by FS.COM as default. Customized label or package solution are available on request.
Contact Person: Fiona