Payment & Shipping Terms:
|Connector A:||MPO Female (pinless)||Fiber Mode:||OM4 (OM3) 50/125μm|
|Polish Type:||UPC To UPC||Insertion Loss:||0.35dB Max（0.15dB Typ.）|
|Attenuation At 850nm:||≤2.3dB/km||Jacket OD:||3.0mm|
|Installation Tensile Load:||100 N||Storage Temperature:||-40°C To +85°C|
|Connector B:||MPO Female (pinless)||Wavelength:||850/1300nm|
|Minimum Bend Radius:||30mm||Return Loss:||≥20dB|
|Attenuation At 1300nm:||≤0.6dB/km||Cable Jacket:||LSZH|
|Long-Term Tensile Load:||50 N||Operating Temperature:||-10°C To +70°C|
optical patch cord,
single mode fiber patch cord
How to connect two switches with 40G SR4 transceivers directly? A type B female MPO to female MPO is required. Figure 1 shows two switches connected by a MPO female cable.
|1||36157||Cisco QSFP-40G-SR4 Compatible 40GBASE-SR4 QSFP+ 850nm 150m MTP/MPO DOM Transceiver|
|2||66234||1m (3ft) MPO Female to Female 12 Fibers OM4 Trunk Cable, Type B|
|3||17931||Generic Compatible 40GBASE-SR4 QSFP+ 850nm 150m MTP/MPO Transceiver for MMF|
|4||29123||S5850-48S6Q (48*10GE+6*40GE) High Performance Data Center Switch|
Max 0.35dB, a typical lower than 0.15dB on MM Low Loss Ferruler and the MPO connector assembly is made by SENKO.
Corning ClearCurve multimode fiber is designed to withstand tight bends and challenging cabling routes with substantially less signal loss than conventional multimode fiber.
Jacketed with compounds that emit limited smoke and no halogen when exposed to high heat sources. This LSZH cable is designed and tested to conform to IEC-60332-1 and IEC-61034.
With BIF, our cable is designed for improved bend performance in reduced-radius applications such as residential or office environments which have less bend sensitivity.
3D interferometer provides verification of MTP/MPO polishing process, and making all parameters of the polished MT ferrule complies and exceeds industry standards. Clean optical connectors are paramount in providing a reliable, high-performance fiber optic infrastructure.
Contact Person: Fiona